Cannon CT 1000 Constant Temperature Bath

Cannon CT-1000 Constant Temperature Bath Overview

The Cannon CT-1000 constant temperature bath supports temperature-controlled kinematic viscosity testing with glass capillary viscometers. CANNON documentation identifies this model for methods such as ASTM D445. In addition, the published specifications list a nominal bath capacity of approximately 17 L (4.5 gal).

This unit offers laboratory buyers a bath for viscosity-testing workflows. However, buyers should distinguish the manufacturer’s model specifications from the actual test results recorded for this individual unit.

Cannon CT-1000 Specifications

• Manufacturer: CANNON Instrument Company
• Model: CT-1000
• Equipment type: Constant temperature bath
• Published operating range: 20°C to 150°C
• Published temperature control: ±0.01°C from 20°C to 100°C and ±0.03°C above 100°C to 150°C
• Nominal bath capacity: 17 L (4.5 gal)
• Intended application: Kinematic viscosity measurements with glass capillary viscometers
• Referenced method: ASTM D445

These figures describe the CT-1000 model according to published documentation. They do not certify the calibration or temperature accuracy of this particular unit.

Cannon CT-1000 Condition and Functional Testing

The unit shows normal cosmetic wear, surface marks, and slight discoloration on the outer casing. The supplied condition notes describe the enclosure as structurally solid.

During testing, the seller filled the bath with approximately five gallons of water and set the thermostat to 80°C. The heating element and temperature controls responded, while the internal stirrer circulated the water. Therefore, the inspection confirmed basic heating and stirring operation under those test conditions.

The seller also recorded infrared thermometer readings of 156.4°F, 174.2°F, and 181.6°F. Since 80°C corresponds to 176°F, these readings show variation during the test. However, an infrared thermometer check does not establish calibrated temperature accuracy. For this reason, arrange standard laboratory calibration before using the bath for high-precision testing.

Applications and Buyer Considerations

Laboratories can evaluate the CT-1000 for kinematic viscosity testing with compatible glass capillary viscometers. The manufacturer references ASTM D445 among the methods associated with this model. Additionally, the bath’s published operating range covers temperatures from 20°C to 150°C.

Before purchase, confirm the electrical configuration and determine which accessories your procedure requires. The supplied listing does not confirm the inclusion of viscometers, holders, bath fluid, thermometers, or other accessories. Also, verify that the equipment meets your laboratory’s calibration and method requirements.

For further information, consult CANNON Instrument Company and the CT-1000 instruction and operation manual.

Explore Laboratory Baths and Circulators

See additional laboratory baths and circulators available from Sapas Lab Equipment to compare equipment options for your laboratory.

Includes

• Cannon CT-1000 Constant Temperature Bath
• Integrated heating and stirring components

Additional Benefits

• 60-Day Warranty
• Local pickup available in Houston, Texas
• Free shipping on select products within the USA
• International FedEx shipping available upon request

Review the product photographs, testing details, and accessory requirements before purchase. Contact Sapas Lab Equipment to discuss your application and shipping needs. Request your personalized quote today.